Machines for inhouse micro cables Ø 0,8-4,0

1 | New Product – UltimaZ E25 for in-house installation, professional device

ULTIMAZ E25, blow fibre units and micro cable blowing device especially for in-house cabling up to lengths of approx. 300 m. The ULTIMAZ E25 is a consequent further development of the version ULTIMAZ P2P. The comfort features E25 is also designed for in-house installation of mini cables and fibres. The performance is improved and its handling is comfortable.

The battery operated electric drive enables an eight hours operation. The pushing force can be adapted electronically by the operator in six steps from 5 to 22 N. The correct pushing force is found out as usual by crash-tests. This precise adjustment of the pushing force is the basic principle to avoid damages to the delicate mini cables and fibres. The ease of use is increased by the automatic contact pressure of the driving roller system. The contact pressure is automatically determined in dependency of the adjusted pushing force. The maximum speed of 80-180 m/min. is also controlled electronically in dependency of the pushing force.

In in-house installation with micro ducts and due to many bows and with special fire protected cables high air pressure of 10-12 bar is necessary.
Because of low air volume small manageable compressors (see below) or compressed air bottles are sufficient.

Accessory and performance see technical details below. Without cable and duct inserts, see accessory below.

Fast and easy starting operation in any spot
The battery operated electric drive with electronic controlling
The operator does not need large cable blowing experience
Small dimension of 80x255x195 mm, weight only approx. 4,3 kg of the basic machine

,Fiberoptic-fibreoptic-blowing-machines,Cable-blowing-equipment,Cable-coiler-uncoiler-unwinder,Drum-windoff,Duct-pipe-cleaning-sponge,Appareile-souflage-fibre-optiques,Enrouleur-dérouleur-bobines,Jeux-calibrage-conduit-tube,Aparatos-soplar-cables-fibra-ópticas,Aparato-intermediario-soplar-cables

Code	Type	C-D	D-OD	Push	Press.							kg
423210	E25	0,8-4,0	3-12	0-22 N	10-12 bar							9,40

2 | UltimaZ P2P for in-house installation, start-up device

UltimaZ P2P blow fibre units and micro cable blowing device especially for in-house cabling up to lengths of approx. 200 m. The UltimaZ P2P makes it possible to continue the last mile from the underground floor to all flats. Drive through an accu-driven hand-drill, accessory.

In in-house installation with micro ducts and due to many bows and with special fire protected cables high air pressure of 10-12 bar is necessary. Because of low air volume small manageable compressors (see below) or compressed air bottles are sufficient.

The torque can be adjusted by fine steps from 0-20 N. This avoids largely damages of the cables. Accessory and performance see technical details below. Without cable and duct inserts, see accessory and techn. details below.

Fast and easy starting operation in any spot
Feeding drive through accu drilling machine of 500 t/min. not included
The operator does not need large cable blowing experience
Small dimension of 210x75x135, only approx. 2,4 kg of weight for comfortable application

,,,

Code	Type	C-D	D-OD	Push	Press.							kg
423200	P2P	0,8-4,0	3-12	0-20 N	10-12 bar							3,90

3 | Compressed air hose

Compressed air hose DN 10, L 7 m, with swing-coupling and connecting standard nipple for UltimaZ P2P to compressor VE 100

,,,

Code	Type	DN	Press.	Length								kg
042334017	DLS 10/7	10	15 bar	7 m								1,60

4 | Air connector for compressor

Air connector for connecting hose DLS 10/7 with a compressor

,,,

Code	Type	D-OD										kg
275610	DAS 42K	7-14										0,44

5 | Air regulator

Air regulator with manometer for subduct calibration set.

With safety couplings for air pressure hoses.

,,,

Code	Type	Adjustable										kg
275724	DMP 16	0-16 bar										1,90

6 | Pressure wheels to P2P

Pressure wheels to P2P, D 40 mm, NBR-tyres or aluminium

,,,

Code	Type	C-D	Material	kg
423341	KAPR 40N	1,0-4,0	NBR-tyre plane	0,02
423342	KAP 40A	1,0-4,0	Aluminium plane	0,07

7 | Drive wheels to P2P

Drive wheel to UltimaZ P2P, steel D 40, with groove.

,,,

Code	Type	C-D	Material	kg
423345	KAP 41N	1,5-2,0	NBR-tyre groove	0,02
423341	KAPR 40N	1,0-2,0	NBR-tyre plane	0,02

8 | Drive wheels to P2P

Drive wheel to UltimaZ P2P, steel D 40, with groove.

,,,

Code	Type	C-D	Material	kg
423346	KAR 42	1,6-2,0	Steel, groove	0,06
423347	KAR 402	2,1-2,5	Steel, groove	0,05
423348	KAR 43	2,6-3,0	Steel, groove	0,06
423349	KAR 404	3,1-3,5	Steel, groove	0,05
423350	KAR 44	3,6-4,0	Steel, groove	0,08

9 | Duct insert divisible for P2P

Duct insert divisible for P2P, for duct-OD 3-12 mm and cable-Ø 1,8-4,0 mm, incl. 6 duct seals.

,,,

Code	Type	D-OD	C-D	For device	kg
423230	RET 3018	3	1,8	UltimaZ P2P	0,01
423232	RET 4025	4	2,5	UltimaZ P2P	0,01
423234	RET 5033	5	3,3	UltimaZ P2P	0,01
423236	RET 6040	6	4	UltimaZ P2P	0,01
423238	RET 7040	7	4	UltimaZ P2P	0,01
423240	RET 8040	8	4	UltimaZ P2P	0,01
423242	RET 10040	10	4	UltimaZ P2P	0,01
423244	RET 12040	12	4	UltimaZ P2P	0,01

10 | Cable insert divisible for UltimaZ P2P

Cable insert divisible for UltimaZ P2P, for cable-Ø 1,0-4,0 mm, for cable lead in.

,,,

Code	Type	C-D	For device	kg
423250	KFT 180	0,8-1,8	UltimaZ P2P	0,01
423252	KFT 250	1,9-2,6	UltimaZ P2P	0,01
423254	KFT 400	2,7-4,0	UltimaZ P2P	0,01

11 | Duct insert not divisible for P2P

Duct insert not divisible for P2P, for duct-Od 3-12 mm and cable-Ø 1,8-4,0 mm, without sealing KAD.

,,,

Code	Type	D-OD	C-D	For device	kg
423260	REN 3418	3-4	1,8	UltimaZ P2P	0,01
423262	REN 5640	5-6	3,3	UltimaZ P2P	0,01
423264	REN 71240	7/8/10/12	4	UltimaZ P2P	0,23

12 | Cable insert not divisible for UltimaZ P2P

Cable insert not divisible for UltimaZ P2P, for cable lead in.

,,,

Code	Type	C-D	For device	kg
423270	KFN 180	1,0-1,8	UltimaZ P2P	0,18
423272	KFN 250	1,9-2,6	UltimaZ P2P	0,18
423274	KFN 400	2,7-4,0	UltimaZ P2P	0,18

13 | Cable sealing-set to P2P

Cable sealing-set to UltimaZ P2P, to RET 3018 up to RET 12040, sets of see table below

,,,

Code	Type	C-D	For device	Set of:	kg
42230140	KAD 10	0,8-1,1	UltimaZ P2P	10	0,01
42230141	KAD 12	1,2-1,4	UltimaZ P2P	10	0,01
42230142	KAD 18	1,4-1,8	UltimaZ P2P	6	0,01
42230143	KAD 24	1,8-2,4	UltimaZ P2P	6	0,01
42230144	KAD 33	2,4-3,3	UltimaZ P2P	6	0,01
42230145	KAD 40	3,4-4,0	UltimaZ P2P	6	0,01

14 | Lubricator automatic device

Lubricator for continuous greasing of the cables blown by UltimaZ P2P, by MicroJets PR/PRM 196. Performance and techn. details see below.

The Lubricator guarantees an uniform lubrication on the whole length duct length.
With the Lubricator the performance is approximatively 20-40 % higher.
Weight machine only 0,6 kg

,,,

Code	Type	C-D	D-OD	For device								kg
423490	L 4	0,8-4,0	3-12	see above								3,00

15 | Lubricant for FOC

Micro Jetting Lube, lubricant for blowing-in fibre optic cables. Excellent lubricating effect. Adheres to the duct wall and leaves the cable nearly dry, an advantage for over blowing and working in cascades with further blowing machines. Consumption approx. 10 ml per 1000 m at duct-ID 10 mm. For other duct-ID analogue

For lubrication unique and ultimate classification, Water pollution class – non-hazardous, acc. to VCI-Conception. Safety data sheets are available.

,,,

Code	Type	Pack. drums										kg
234975	MJL 240	1 bottle 0,24 l										0,32

16 | Duct cleaning sponge

Sponge for sub duct cleaning and pre-lubricating prior to cable blowing

,,,

Code	Type	D-OD	D-ID	Cellular	Qty.	kg
275398	RSM 04	7	4	D 8×30	20 pcs.	0,01
275400	RSM 06	7-10	5-6	D 12×30	20 pcs.	0,01
275402	RSM 08	10-12	8	D 16×50	20 pcs.	0,02
275404	RSM 10	12-16	10-12	D 20×50	20 pcs.	0,03

17 | Compressor electric motor

Compressor with electric motor for blowing-in optic bundle fibres and mini cables in in-house installation. 230 Volt, without after cooler. Portable and transportable on 2 wheels. Soundproof hood. Suitable for UltimaZ P2P.

Electric motor 1,1 kW, 230 Volt, compressor dimensions: 560/350/560
Capacity 100 l/min. at 12 bar.
Soundproof hood 71 dB(A).
Pressure reservoir 4 litre

,,,

Code	Type	Air	Press.	D-ID	C-D							kg
960102	VE 100	100 l/min.	12 bar	2,5-5,5	0,8-4,0							31,00

18 | Compressor electric motor

Compressor with electric motor. For blowing-in fibre optic micro cables, fibres and bundle fibres. Mounted on 2 wheels, which enables the transport on stairs for one person alone. Suitable for UltimaZ P2P.

Electric motor 1,5 kW, 230 Volt, compressor dimensions: 570/440/1050 mm.
Sound insulation bonnet, sound pressure level 79 dB(A).
Constant, infinitely adjustable delivery pressure due to new piston compressor principle.
Oil-free operation, no oil change, no check, oil- and water-free air.

,,,

Code	Type	Air	Press.	D-ID	C-D							kg
960104	i. Comp 3	0,12m³/min.	11 bar	2,5-6,0	0,8-4,0							29,00

19 | Cable unwinder

Cable unwinder for small drums, even with damaged flanged wheels for electric installation works. Tubular steel construction galvanized. Consisting of: basic frame with 2 rubber coated wheels, one drum shaft D 25 mm with 2 cones of polyamide for hole diameter 25-80 mm.

Collapsible for easy transportation to the site.
Easy movable with the drum through big rubber coated wheels.
For drum-D to 800 and drum widths to 530, drum weight max. 200 kg
As accessory steel tube drum shaft D 50, ball bearings, 2 clamps, for cones see table below.

,,,

Code	Type	Equipment	Shaft	Cones for	kg
320290	KTA 8	Winder as above	D 25	Hole D 25-80	11,60
320292	KTA 8W	Steel tube shaft	D 50	See next line	2,05
315504	ZKP 50-80	Poly-cone (1 each)	D 50	Hole-D 50-80	0,15
3155045	ZKP 50-108	Poly-cone (1 each)	D 50	Hole-D 50-108	0,39